Products

The YSR Automatic LTCC Chamfered Ball Screening Machine is used for sorting zirconium balls, product adhered chips, and product fragments after chamfering of LTCC products.

The YSR Automatic LTCC Powder Removing Machine is used for the treatment of LTCC products and raw powder after cutting.

Automatic LTCC End Sealing Machine Equipment Usage: End - sealing for LTCC products
Maximum Equipment Dimensions: Approximately 1450mmW×10500LmmD×1850mmH (excluding the height of the high - efficiency purifier and the alarm height)
Applicable Imperial Sizes: 008004, 01005, 0201, 0402, 0603
Equipment Body Weight: Approximately 11200Kg
Equipment Appearance: The lower frame is painted with a bright finish, the upper frame is painted with a bright finish, and there is a transparent acrylic observation window.
Feeding Rate: Above 97%
Continuous Single - board Efficiency: ≤30 seconds/board

The YSR Automatic LTCC Edge Trimming Machine is specifically designed to remove the excess residue or irregular parts on the edges of bars for chip - type component products.

The YSR Automatic LTCC Slitting Machine is specifically designed to provide the bar slitting process after lamination for chip - type component products. The equipment uses two sets of CCD as the visual alignment imaging system. By taking images through hardware and processing to determine the edge of the bar as the basis for cutting, the bar is divided into four parts.

The YSR Automatic LTCC Screening Machine is used in the LTCC green lead process and end - firing process for the functions of screening adhered chips and long strips.