YISENRONG Automatic LTCC Loading and Unloading for End Firing Machine is that the operator puts the fixture with the carrier net/cover net into the equipment, pours the chips into the hopper, and the chips are evenly spread on the carrier net through the automatic discharging mechanism and then input into the end - firing furnace in parallel. The automatic unloading equipment automatically grabs the mesh sheet output from the end - firing furnace, then collects and screens the chips, and automatically loads the empty carrier net/cover net into the fixture.
Loading: 1900*1650*1750
Unloading: 2100*1800*2250
A. Properly wear protective equipment.
B. Conduct equipment safety inspections.
C. Follow operating procedures and risk mitigation measures:
Do not touch moving parts (e.g., cutters, pulley wheels) with hands.
Do not adjust, measure, or clean debris by hand during operation.
For multi-person collaborative operations, clarify division of responsibilities to avoid accidental activation of control devices.
D. Equipment maintenance and emergency preparedness:
Perform regular maintenance and upkeep.
Clean equipment after use; inspect worn parts (e.g., cutters, bearings) and replace them promptly.
Regularly test safety devices (e.g., protective covers, emergency stop switches); unauthorized removal is prohibited.
E. Emergency response:
In case of sudden malfunction or accident, immediately cut off power and report the incident; do not attempt to repair equipment while it is running.
Delivery period: 90 days.
Address
No. 225 Jinting North Road, Jimei District, Xiamen City, China.
Tel
