Automatic HTCC Warm Isostatic Press Machine

Overview of Main Equipment Functions:

Automatic Locking: After the materials enter the high - pressure chamber, the high - pressure chamber is automatically locked.

Automatic Heating: After starting work, heating starts automatically according to the set temperature.

Automatic Pressurizing: When the set conditions are met, pressurizing starts automatically.

Over - pressure Protection: Multiple protection measures are adopted to prevent over - pressure, and a safety valve is installed.

Touch - screen Operation Function: It is fully operated by a touch - screen. All parameters are set on the touch - screen. The operation is simple and convenient, and the human - machine interface is friendly.

Safety Function: The hardware is equipped with an emergency stop switch, and the software is equipped with an interlock function. In case of an emergency, the emergency stop switch can be pressed to stop the operation of the equipment. The interlock function realizes the interlock of mutually interfering moving mechanisms in the software, maximizing the safe operation of the equipment.

The equipment has alarm and fault prompt functions.

Adjustable Heating and Pressurizing Time: The starting time of equipment pre - heating, the pre - heating time of products, and the lamination time of products can be set. The PSI of the chamber pressure can be customized according to customers.

Equipment Dimensions: 1700×1150×2250 (mm)

Safety Precautions for Mechanical Equipment Operation:‌

A. Properly wear protective equipment.‌

‌B. Conduct equipment safety inspections.‌

‌C. Follow operating procedures and risk mitigation measures:‌

Do not touch moving parts (e.g., cutters, pulley wheels) with hands.

Do not adjust, measure, or clean debris by hand during operation.

For multi-person collaborative operations, clarify division of responsibilities to avoid accidental activation of control devices.

D. Equipment maintenance and emergency preparedness:‌

Perform regular maintenance and upkeep.

Clean equipment after use; inspect worn parts (e.g., cutters, bearings) and replace them promptly.

Regularly test safety devices (e.g., protective covers, emergency stop switches); unauthorized removal is prohibited.

E. Emergency response:‌

In case of sudden malfunction or accident, immediately cut off power and report the incident; do not attempt to repair equipment while it is running.

Delivery period: 90 days.